|
| CJK-1 |
for IRt/c, IRt/c.3X, IRt/c.1X
Water/Air Cooling
A convenient and inexpensive kit makes it possible to use the IRt/c with air, water, or both for service in harsh environments. Measuring only 1" x 4.16" (25 x 106 mm) overall, the CJK-1 is physically small enough to fit into tight areas and closely monitor process temperatures from the optimum position - up close. With its all stainless steel housing, it can withstand the harshest environments. Extraordinarily efficient in design, the CJK requires only .05 gpm (190 cc/min) of water and 0.1 CFM (3000 cc/min) of air to protect an IRt/c at 1000°F (540°C). |
|
| Features |
 |
Small size - 1" dia. x 4.16" lg. (25 x 106mm) |
|
Stainless steel housing |
|
Seamless copper monotube cooling coil |
|
Complete equipment for air cooling and/or water cooling |
|
Air purge included |
|
Super-efficient design for low air and water use |
|
Fits IRt/c, IRt/c.1X, IRt/c.3X |
|
Water cooling to 1000°F (540°C) with as little as 0.05 gpm (190 cc/min) and 0.1 CFM (3000 cc/min) of air |
|
|
 |
| Water Cooling Configuration. All fittings required are supplied. Water flow > 0.5 gpm (190 cc/min). |
|
 |
The water cooling system consists of a seamless monotube, in order to eliminate the possibility of leaking joints. For convenience, the seamless tubling extends 3 ft (1 m) from the rear of the housing. |
|
|
|
|
| CJK-1 Housing Dimensions |
 |
|
|
|
|
|
|
|
|
