#94 Easy Upgrade of Existing Temperature Control Systems with IRt/c and t/c.XMTR
Replace conventional infrared sensing systems for superior accuracy, reliability, and low cost.
Replace contact temperature sensors for non-contact measurement of actual product tempera-ture instead of oven temperature.
Retrofit using existing PLC analog inputs (4-20 mA, 0-5 V, 0-10 V).
The t/c.XMTR is specifically designed to make replacement or retrofit simple and inexpensive:
In-line t/c.XMTR design is only slightly larger than the cable and requires no mechanical support.
Precalibrated for thermocouple type and tempera-ture range eliminates all adjustments, require-ments for simulators, etc.
For OEM’s, IRt/c’s and t/c.XMTR can be factory supplied wired together.
Hermetically sealed stainless steel construction is suitable for the harshest service without any additional packaging.
Use any existing wiring, including thermocouple, RTD, etc. The t/c.XMTR is specifically designed to interface to any model IRt/c (or any conventional thermocouple) by a simple thermocouple connector or splice. The 2- wire current loop can be used in any conventional current loop, 0-5V, or 0-10V circuit that is scaled for the temperature range of interest.
The t/c.XMTR is specifically designed to interface to any model IRt/c (or any conventional thermocouple) by a simple thermocouple connector or splice. The 2- wire current loop can be used in any conventional current loop, 0-5V, or 0-10V circuit that is scaled for the temperature range of interest.
